Supply and transport plastics

1-phase feeders

Single-phase feeder VLM is the ideal solution for feeding short distances within the machine. The blower is mounted directly above the plastic tank. The feeders are equipped with an automatic compressed air filter purge function. A valve can be connected to each feeder, proportional for feeding the original and milling. Flow rateis up to 600 kg / h, at a distance of 30 m. Microprocessor board and keypad allow the operator to easily program and control the machine

Integrated management::

•  Two-stage 900 W blower (the VLM 25 has an 1800 W brushless blower)
• Automatic compressed air filter cleaning
• Inspection flap with stainless steel vent filter
• Control via keypad and digital LED display indicating operating status and any alarms
• Built-in double cover separating the engine area from the blower for improved operation
• Aluminium mounting ring 360
• PUR hose and suction lance includ

VLP- Feeders for transport powders

VLP powder feeders are an intelligent solution for the pneumatic transport of powdered plastics.

They can also be used to transport food, pharmaceutical and chemical products to the highest hygiene standards. They are ideally suited to free-flowing powders with a particle size of 10 to 200 μm and a bulk density of 0.35 to 1.8 kg/dm3.

They can also be used with smaller particle sizes, using special sintered filters. Also available for Matrix centralised systems and with external PD vacuum pump.

Integrated management:

• High-performance compressed-air vacuum pump
• Butterfly drain valve
• ASTM304 stainless steel container
• Antistatic polyester self-cleaning filter
• Compact and modular design
• Control unit
• Compressed air calibration kit
• Probe and extraction line
• Vane level sensor

VLV VENTURI

Compressed air feeder model VLV for small production batches of up to 20-30 kg/h. Entirely made of anodised aluminium with a Pyrex spigot with adjustable level sensor, the VLV feeder is equipped with a high-performance suction probe for Venturi-based pneumatic conveying. It can be installed directly on the machine or on a small tank.

Series TMM

TMM series stainless steel storage tanks are suitable for use in centralised MATRIX 4 systems.0. Eight models are available, with capacities ranging from 2 dm3 to 100 dm3.

TECHNICAL SPECIFICATIONS:

• Stainless steel construction
• Hinged lid.
• High vacuum
• Automatic filter cleaning
• Flapper drain valve and wear-resistant seal
• Vent with flap and integrated metal filter
• ETHERNET connector

ACCESSORIES:

• Pneumatic trigger
• Proportional valve
• Readiness for MWS weighing system

Series LDM

The LDM series feeders, made entirely of stainless steel, and those of the LDX series, with a central Pyrex glass body, are suitable for use with PD series three-phase feeders.

Eight models are available, with capacities ranging from 2 dm3 to 200 dm3.

TECHNICAL SPECIFICATIONS:

• Stainless steel construction
• Hinged lid
• High vacuum
• Automatic filter cleaning
• Flapper drain valve and wear-resistant seal
• Vent with flap and integrated metal filter

ACCESSORIES:

• Pneumatic trigger
• Proportional valve
• Level sensor

Pump three-phase PD + storage tank

Three-phase pumps are used for highly demanding material handling. Individual models have a suction section separate from the tank, which is connected to it by a vacuum pipe. Plastic Systems has a range of storage tanks with capacities from 2 dm3 to 100 dm3 to meet any requirement.

TECHNICAL SPECIFICATIONS:

• 1-3 stage side-channel blowers
• Self-cleaning filters with polyester cartridges and dust tray
• RS485 ModBus interface

ACCESSORIES:

Clogged filter alarm pressure indicator

CENTRAL SYSTEMS FEEDING SYSTEMS FOR PLASTICS

A central plastics feeding system is the near future for any modern company based on plastics processing. Automation of the feeding and drying process provides the opportunity for full control of parameters and better management of resources.

We have prepared a list of the most important benefits below:

• Energy efficient
• Operation reduced to a single computer workstation or on the control panel of the PBX
• Transparency of processes and parameters during production
• More space at the machines, the units are usually mounted on mezzanine floors
• Less maintenance and breakdowns
• Employee safety
• Can be expanded as the company grows

Muehsam Rozwiązania dla Przemysłu is a team of engineers who implement state-of-the-art solutions based on renowned equipment and software manufacturers.